Pickleball Paddle 525
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
13.5mm thick pickleball paddle
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Building on what I learned from the first couple of paddles I made…
This paddle is 13.5mm thick, with a different core design, frame width, and face thickness.
I printed the paddle in PETG with 25% gyroid infill.
5 vertical walls
6 top/bottom layers
The handle was printed in PLA with 15% gyroid infill
6 vertical walls
5 top/bottom layers
The paddle is printed with one of the face flat on the build plate, nothing fancy.
The handle was printed with the screw sockets face down to the build plate, with support from the build plate and between the paddle socket opening.
Once complete secure the paddle to the handle with #10 nuts and screws.
This paddle has slightly above average POP, when striking the ball.
While it plays decent it does present a little move issues with ball control, because of the added pop.