Pickleball Paddle 2C
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Light weight 13.5mm pickleball paddle
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Another week, another change…
This paddle is based off of the 13.5mm paddle I printed.
We added an opening through the paddle to reduce weight and the handle was changed to allow for more grip room.
The paddle was printed from PETG while the handle was printed from PLA.
Print the paddle with one face on the build plate
25% cubic infill
4 perimeters
5 top/bottom layers
Print the handle with one of the screw sockets facing the build plate, with support from the build plate and between the paddle socket.
15% cubic infill
6 perimeters
5 top/bottom layers
When complete attach the paddle to the handle with #10 nuts and screws.