1 / 1
Modular Drawers for IKEA Kallax - Remix - Fixes a few things — image 1

Modular Drawers for IKEA Kallax - Remix - Fixes a few things

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A better version of an already great model, Utilise the "entire" depth of the Kallax

Rating
5 / 5
Likes
44
Downloads
167
Makes
1
Views
1,272
Reviews
1

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Share Alike

Based on the design of the “Modular Drawers for IKEA Kallax” by KILO, I created longer versions to fill up the entire depth of a Kallax pocket.

Also, there seems to be a critical part missing in his Printable, which I added here, see the list of differences this remix provides.

UPDATE #2 6 Sep, 2025:

  • Added long cubbies for double height drawers
  • Added long double height drawers in 3 variants
    • Empty
    • Re-spaced dividers for the bucket (see original model)
    • With slots for adjustable dividers
      • And the dividers, obviously
  • Added long cubbies for double width drawers
  • Added long double width drawers in 2 variants
    • Empty
    • With slots for adjustable dividers
      • And the dividers also, of course

Fair warning: Slotted stuff is still untested, tolerances for correct fit NOT YET tested.

UPDATE #1 6 Sep, 2025:

About 160 hours of printing, half way there :)

UPDATE 29 Aug, 2025:

After 30 hours of printing, the results are in;

  • Weird faults in the print, see pictures; layer adhesion issue, a layer shift when spool join kicked in.
  • Drawers are very tight, unrelated to the layer shift (they are tight in the unaffected part as well), so I changed them
  • The connectors and TPU feet fit perfectly.

UPDATE 28 Aug, 2025:

Updated the cabinet. While printing, the inner tray support structure wobbles, leaving a poor quality print. Added structure to support it better.

UPDATE 25 Aug, 2025:

Added a 1x20 version of the drawer. 

Project status update; 

still printing :) (it's about 6 hours for a set of 2 drawers, 20 hours for one cubby, and it's not the only thing scheduled, so it will take at least a week more… We'll get there!

All TPU feet have been printed, all connector pieces too.

UPDATE 18 Aug, 2025:

Tolerances of the new connector piece are spot on.

Hardly any wiggle after installation, but still easy to slide in. Of course, this all depends on printer calibration, and my test was done with an old Ender-3 (While my Prusa XL was busy), using REAL PLA (old leftovers, age about 3 years). It's impossible to photograph, but I tried ;P

I also tried to make a video clip;

Tags