Cammus C5 stock fan mount mod [Fixed]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cammus C5 direct airflow mount for stock fan
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 32
- Makes
- 0
- Views
- 248
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
Lately my c5 was gueting really hot and the stock refrigeration solution provided with the table mount wasn't so good so i designed this small mount that uses the stock fan to draw air directly into one of the back ventilation grills of the wheel.
This solution maybe dont improbe to much te over heating problen, but i think it will work, but i didn't have prove it yet.
FIX:
This is a revised version of the original model with thicker walls to make printing easier and also adding some streng. I also added a version whit a small grid to protect the fan.
IMPORTANT:
-This is my first time using a cad program so i may have some errors in the designing procest, so if you want to solve someting ur just remix it i also added the fusion 360 project.
-The walls of the fan duct are very thin so they may deform from heat if printed with pla.
INSTALLATION TIP:
-You can install it heading up or down dependig on your needs, as shown in the photos
-To secure the fan in place ill recomend you to heat up the little arms with a hair dryer or something like it to let then bend a bit whitout breaking during the assembly.
PRINTING:
-Low the speed during the duct layers, and only apply tree suports to the small pins on the arms.