SATA Drive Cage for Jonsbo Backplane v39
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stacks 5 SATA 3.5" drives
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 53
- Makes
- 1
- Views
- 597
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
1x Backplane: https://www.aliexpress.us/item/3256808318459164.html
1x Rails: https://www.amazon.com/dp/B08S6T53VW
17x Heat-set inserts: M4x0.7 6.4mm: https://www.mcmaster.com/94459A160/
5x PCB Bolts: M4x0.7 6mm: https://www.mcmaster.com/97763a815/
Head must be <3.5mm high
12x Cage Bolts: M4x0.7 10mm: https://www.mcmaster.com/91290A144/
Inset, designed for standard socket head
Careful with the pieces--in particular the front and the back are not the same.
Had to sacrifice the rail guides in favor of some air flow.
You're welcome to try to print the upper cage all in one piece, but I've had two different bambulab printers fail at it.