1 / 2
Raspberry Pi 5 Case with Toolless Lid
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made a quick toolless version of the Pi 5 hex lid and case from Stamos
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 42
- Makes
- 1
- Views
- 274
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Cauton: Make sure you don't hit any surface mount components with the pillars, chances are slim to damage anything if you are gentle.
A tad difficult to fit or remove the lid, but once on the pi is very secure.
Keep a small soft pry tool close by to manipulate the pillars through the lid hex holes to snap into place, some bending and manipulation of the lid to fit will come in handy!
I found the lid to come out best when printing on its side with good support
Use at own risk.