1 / 5
Ashley Velburg Swivel Chair Bushing Replacement — image 1
1 / 5

Ashley Velburg Swivel Chair Bushing Replacement

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a bushing to repair a broken Ashley Velburg Swivel Chair

Rating
0 / 5
Likes
1
Downloads
3
Makes
0
Views
27
Reviews
0

Updated at source:

Model information

Category
Living Room
License
Creative Commons — Attribution

 This is a bushing to repair a broken Ashley Velburg Swivel Chair. It is the plastic portion that the metal chair post slides into. Mine broke soon after buying the chair and its since been discontinued so I could not find a replacement. I printed with a high infill for strength. It is a VERY tight fit and may require increasing/decreasing the size by a couple percent to meet the dimensional accuracy of your printer. The flat lateral edges align with the metal lips inside the chair stand. As it is a tight fit, I hammered it into place.

I noticed very minimal and practically unnoticeable rocking when using the chair after placing this bushing. It was no more rocking than the chair came with stock. However, striving for perfection, I hammered in 6 toothpicks between the bushing and metal female framing of the stand, then colored the toothpicks with sharpie. There is absolutely no rocking any more and the chair now works like stock if not better.

Update: Chair has held up successfully for several months with no indication of weaking or wobble.