HueForge Marilyn Monroe hitting weights-Thin.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This thinner base version for the Marilyn Monroe hitting weights
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 250x263.28mm in size
You may print at higher layer heights below the Base Thickness of 1.04mm
The Max allowed Thickness is 3.04mm and the Actual Thickness is 2.72mm
Filaments Used:
#000000 PLA Eleegoo BLACK Transmission Distance: 0.1
#6c6c6c PLA AnyCubic Textured Gray Transmission Distance: 1.1
#ffffff PLA+ Elegoo white Transmission Distance: 4.2
This print uses 3 unique filaments
Already setting in 3.mf files, if you need to set them up in a manual feed and need to set up layer height from the layer thickness not the height number
Swap Instructions:
Start with BLACK
At layer #7 (1.36mm) swap to Textured Gray
At layer #11 (2.08mm) swap to white for the rest.