johnny Depp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Public Domain
hue forge print Johnny Depp…..
sometimes it is difficult to get the colour blend right but this one….. Awesome!
here are the steps…
Project: johnny young.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#8c9099 PLA PolyLite Grey Transmission Distance: 1
#e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with PolyLite Black
At layer #9 (0.8mm) swap to BambuLab Basic Blue Gray
At layer #11 (0.96mm) swap to PolyLite Grey
At layer #14 (1.2mm) swap to BambuLab Basic Beige
At layer #22 (1.84mm) swap to PolyLite White for the rest.