1 / 2
Helix Compose DIY FlexMount20/25
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basic mounts of the Helix Compose tweeters to design your own speaker adaptor rings.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 107
- Makes
- 0
- Views
- 300
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This design serves as the basis for designing and printing a speaker mount for a speaker with FlexMount20 or 25 technology.
Please be aware, that small clips tend to break off easily depending on filament, layer height and printing orientation.
We recommend printing only ABS or ASA if the adapter is to be used in a car. It should be printed a layer thickness of 0.16mm.