1 / 9
Enclosure fan ventilation (Ikea Lack) for a 92 mm fan with static pressure enhancer (axial compressor)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ikea-Lack housing fan duct for a 92 mm fan with static pressure enhancer (axial compressor)
- Rating
- 5 / 5
- Likes
- 61
- Downloads
- 174
- Makes
- 2
- Views
- 2,390
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Ikea-Lack housing fan duct for a 92 mm fan with static pressure enhancer (axial compressor).
Helps to extract odors from the enclosure and remove them using an optional 50mm suction hose.
Update 05.04.2022:
In order to increase fan static pressure a version with stator vanes and a inlet with vanes was added. The design is inspired by axial compressors in jet engines. For the new version see housing-with-stator.stl and inlet.stl
Instructions:
- use a 55 to 56 mm hole saw
- 92mm fan
- optional: 50mm / 2inch hose
What you need:
- 92mm fan
- optional 50mm / 2 inch suction hose for exhaust air
Print instructions
- Use PETG, ASA, PLA or any of your favorite material
- 0.2mm Layer
- no supports needed
- with ASA use a 6mm Brim for the fan-part
- scale nut to 101% in x/y-direction (not z) for proper fit (especially with PETG)