1 / 2
Flexible JST-XH Cover w/Tether (LiPo Balance Lead) — image 1
1 / 2

Flexible JST-XH Cover w/Tether (LiPo Balance Lead)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Flexible version of the JST-XH cover - with a tail and hole to act as a tether to prevent losing it!

Rating
5 / 5
Likes
7
Downloads
47
Makes
1
Views
206
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

By request on my other model (XT90 flexible cap & tether) - here's a flexible version designed for the balance port. I started with the model uploaded by RapidMonster and recreated it so I could tweak the design and add the tail with the hole. 

They also have text cut into the top cover (facing the build plate) to make it easier to know what size the connector is for. 

Two variants are uploaded:

  • The “tight” version fits snugly around a bare JST-XH connector, 
  • The “loose” version fits snugly around a JST-XH connector with the backshell on it. 

Both versions you have to streeeeeetch around the connector. It feels like the TPU is going to snap, but I have yet to break one of my test prints… 

 

I've only tested the 3S “Tight”, 4S “Tight”, and 4S “Loose”, based on batteries I have available. But due to the power of ~*~math~*~, the rest should work too. Let me know if not!

 

My print settings:

  • Centauri Carbon
  • 0.4mm nozzle
  • “0.12mm Fine” profile in ElegooSlicer
    • 225C, 40C, 3.2mm³/s
  • GEEETECH 95A TPU