Floppy drive 3.5" face panel
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.12 – €0.15 net (excluding VAT)
For file: 3.5face_front_button_0.15mm_PETG_MK3S_10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.13 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 10.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A 3.5" floppy drive face panel.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 388
- Makes
- 1
- Views
- 1,298
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
This includes the button and a face for a floppy drive. The button snaps into the ejection mechanism and is kept straight by the face panel. The face snaps into the bottom portion of the floppy. Top portion tabs of the floppy face are a bit finicky (kept breaking off). I used tape to assist the top tabs.
Second image shows the tape and final assembly. First image shows the tabs working without any tape. Lastly the third image shows what type of floppy drive was used. The face panel in that image was a placeholder.