1 / 5
Fuming Dragon Head
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Now the Dragon is letting steam off
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 32
- Makes
- 0
- Views
- 182
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Characters & Monsters
- License
- Creative Commons — Attribution — Noncommercial — Share Alike

This is an example on how to use my “improved Mini Mist Maschine”
( https://www.printables.com/model/1388281-improvement-of-the-mini-mist-machine )
in a model.
I used Fusion 360 to insert the mist machine. with the following steps.
- Scale up the model in Prusaslicer 2 - 4 times.
- Import the stl Mesh in Fusion 360
- Import the cut out for the machine
- Scale the model (not the cut out) so that the cut out will completely fit in the model, with exception of the air and cable inlet in the back.
- Level and orient the model and the auto out
- Reduce the number of facets of the model (approx 10'000)
- Convert the mesh into a solid.
- Cut the cut out of the model.
- Draw splines from the top of the cut out to where you want the fog to come out.
- Convert de lines to pipes.
- Cut the pipes out of the model.
I include the Fusion F3D file where you can follow the steps to accomplish this.
Of course there are other methods even in Prusa slicer itself. Then getting the tubes from the mist machine to the surface might be difficult.