Henry Rollins hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
the man, the myth, the legend
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
https://www.youtube.com/watch?v=ChJPP4doC0Q
Project: henry.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x135.33mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm
Filaments Used:
PLA+ Esun Black Transmission Distance: 0.1
PLA PolyLite Natural Transmission Distance: 21
PLA+ Esun Bone White Transmission Distance: 6
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Natural
At layer #11 (0.96mm) swap to Bone White
At layer #17 (1.44mm) swap to White for the rest.