Universal Peg Board Screwdrivers' Holder (x12)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact dual-row screwdriver holder for 1" pegboards (12 tools). No overhead clearance needed.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 62
- Makes
- 0
- Views
- 275
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this screwdriver holder to make the most of my limited pegboard space. By going with a dual-row layout, it fits up to 12 screwdrivers in a compact area. A big advantage of this design is that it doesn’t require free space above the screwdrivers to remove them—unlike traditional hole-based holders. This makes it ideal for setups like mine, where there’s a shelf directly above the pegboard, allowing me to mount the holder as close as possible without losing usability.
The holder is compatible with the Universal Pegboard System, which makes it strong and easy to print. Since the pegs are printed on their side, the stress is applied perpendicular to the layers, making them very durable. You’ll need three pegs to mount the holder:
- Universal peg board peg system
- Or, as an alternative, I used these ones as they fit better for my peg board
⚠ Note: This design is made for pegboards with 1 inch (25.4 mm) hole spacing. It will not fit 25 mm pegboards.
During testing, I noticed the screwdrivers were a little wobbly, so I added snapping strips. With them, the tools now sit perfectly snug.
Print Details
Material: PETG
Infill: 50%
Supports: Not required
Assembly: I printed the snapping strips twice and welded them onto the main part using a 3D pen (highly recommended tool!). Screws or glue should work just as well.