1 / 4
Tapo TC82 camera pole mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pole mount for outdoor Tapo camera.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 30
- Makes
- 0
- Views
- 186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
I needed to fix a Tapo TC82 camera on a pole. The pipe has a 32 mm diameter; I made the clamp a bit bigger so it should grip up to 34 - 35 mm pipes.
You will need 6 M3 screws and nuts about 15 mm length to fix the base to the clamps then 2 screws M4 of 20 mm to tighten the clamps to the pipe.
To fix the camera to the base you need 3 M3 100 mm screws and nuts.
There are 2 versions for the base, the difference is the orientation of the holes. They are equal otherwise.