Vehicle bicycle carrier (rack) frame riser/spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spacer for Retrospec Lenox bike racks. Allows rotation of the bike on the carrier to better fit multiple bikes.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This allows the bike to be repositioned on the rack. It can raise up the front end (to increase ground clearance). It also allows multiple bikes to be put on the rack without the handlebars crashing into various bike parts, for closer mounting.
This fits Retrospec Lenox racks (as seen on Amazon) and attaches with a 1" velcro strap. The OEM stretch strap will not work to secure the bike to the rack, so you'll need a different strap to enable that. A cam lock strap works great.
Foam or some cloth will need to be used to protect the frame from rubbing on the printed part.
I print items like this out of PA-GF for outdoor use and durability. No support needed.
70mm (shown) and 50mm spacers. Take your pick.
Tested on dirt roads, secondary roads and highways. It worked fine for my application.