Dell 60W USB C charger block holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A holder to secure a Dell 60W USB C charger and cables (model: HA60NM200) by using #12 wood screws on to a table
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 30
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Public Domain
We are using these nifty USB-C charging blocks for our Dell Pro 14 Plus PB14250 laptops for our university libraries but they are small and nice enough that we think they might "walk away" if left unsecured. This 3D print will allow use to fit the charger and cables securely using the provided holes with #12 wood screws (a drill guide file is included) into wooden tables. It as a hole for indicating its status and some vent holes which I am not sure how effective it will be, but better to have than not I suppose. This is not a 100% secure solution as there are many ways to break a 3D print but serves as a hinderance to deter it getting lost for most cases.
Printed 0.3mm layer height using 0.6 nozzle
15% gyroid infill, 5 perimeter walls, no supports needed