1 / 3
Sunlu filament drier mods
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modified the Sunlu filament drier to feed filament correctly while drying. test run = 50 + kg without problems
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 7
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This modification works incredibly well to guide filament from a Sunlu Filament dryer.
Tilted up like this, it stops the filament from tangling during a long print, or at the end of the spool.
You will need;
4 - 4mm x 14mm machine bolts (Philips head)
4 - 4mm x 12mm machine bolts (Philips head)
4 - 4mm flat washers
8 - 4mm nuts
4 - 608Z skate board bearingsCheese head / pan head bolts will not fit the reliefs of the outer bearing holder
Tape the drill template in place and drill carefully