Harbor Freight Item# 93928 mod.

I wanted an easy to access hardware box that matched the parts boxes that I use for my 3d printer.

Harbor Freight does not offer one in this size/type with more than 20 bins.
(Hence, I designed this mod)

By replacing the bins that came in the case with these printed smaller ones the case now contains 48 individual bins. (44 small bins and 2 double bins are required)
I intentionally made them a little larger, hoping to keep the hardware separated better. It does make the lid a little bit harder to close. Make sure that you latch all 3 snaps.

It will keep the hardware separated (with normal use) 

When replacing all of the bins with small ones, due to asymmetrical case construction, 4 small bins will not sit flat. You will need to print two double bins. There is a picture included to show were they need to be installed.

I updated this with a divided small bin for those tiny pieces to fit in. ( Replace as many small bins as you would like with these) Changing all of them to to divided bins allows for 92 storage compartments per case.

I have included the FREECAD & STL files to make mods easy.

I recommend printing the bins oriented up, with support.

Please adjust as you would like.