Pencil Case With A Twist
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
https://youtu.be/Ms1TK1qV0tI I used mine for almost 4 years now and it showed minimal wear :) you will need 3 more…
- Rating
- 5 / 5
- Likes
- 73
- Downloads
- 184
- Makes
- 3
- Views
- 2,757
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I used mine for almost 3 years now and it showed minimal wear :)
you will need 3 more things besides the 3D print.
- 6mm steel ball
- steel spring 10mm long with outer diameter 5mm
- superglue
updated "inner piece" 11/30/2019 : deeper holes for the mechanism so that there's less wear and tear.
glue the spring mechanism inside the hole to not make it shoot out when the case is pulled apart.
the logo is supposed to just snap inside and be held by friction. if it doesn't work you can use the one with a bigger tollerance and glue it in place.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
20%
Filament:
Creozone PLA
Notes:
You can also print it with a 0.2mm layer height but i would advise to rather go with 0.15
Defentaley print the outer part with a brim if your print surface doesn't stick extremely well.
If you print the outside in white fillament you can actually sand it to make it feel extremely smooth.
In Prusa Slicer make sure to turn of "detect thin walls"
the logo can be printed and just pushed in the cutout
VIDEO
Category: Containers