Drier Vent Fixture with embedded magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An embedded magnet fixture to fix a 4" drier vent to a mesh window.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 46
- Makes
- 0
- Views
- 736
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Don't forget to add a “Pause Print” when slicing!
This print requires 16x neodymium magnets (5 x 2 x 12 mm dimensions).
The outer ring can be flipped after printing, if you get the magnet polarity wrong. Just make sure all magnets in a ring “face” the same direction.
This fixture allows you to attach a drier vent outlet to window that has a mosquito mesh installed. The advantage is not having to damage the net or do any sort of modification to the window. Additionally, the vent can be dragged around to wherever you need, even after installation.
The ring that goes outside the window has holes so you can secure it with string to the window frame. This is recommended so that you don't lose the ring when you detach the vent.
The ring that goes on the duct has a loose tolerance. Seal the lip to the vent using tape