Disney Monorail Playset Track Microswitch Actuator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
On newer monorail playlets, the station has small bumps in the track that hit a microswitch on the monorail engine to…
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 43
- Makes
- 0
- Views
- 475
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
On newer monorail playlets, the station has small bumps in the track that hit a microswitch on the monorail engine to signal the train to slow down and stop. If you build a permanent track layout without the station, you can print 3 of these actuators that snap onto the track to signal the train to slow and stop. The first actuator drops the train speed in half, the second actuator slows to about 1/4, the third one signals the train to stop.
You might need to adjust the actuators a bit so they hit the microswitch just right. If the actuator is loose on the track, add a bit of tape on the inside to make it tighter and easier to adjust.
All your default print settings should work. No supports.
Category: Toy & Game Accessories