1 / 5
Fan Mount for Voodoo 3 2000 (and other 40mm heatsinks) — image 1
1 / 5

Fan Mount for Voodoo 3 2000 (and other 40mm heatsinks)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a fan mount designed for the STB/3Dfx Voodoo 3 2000. It may also work for other 40mm heatsinks.

Rating
0 / 5
Likes
2
Downloads
35
Makes
1
Views
209
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Public Domain

There are two versions – one with one side blocked off, intended to face the AGP slot on the Voodoo 3 (since any air going “down” is blocked by the slot anyway).  I've also made a version with a less restrictive bottom for other applications.  The heatsink on the Voodoo 3 is approximately 7mm tall, so this should clip on to any heatsink that is 40x40x7.  Due to the extreme heat of the Voodoo 3, this needs to be printed from ABS or other heat-resistant plastic.  Screw holes sized for m3 screws, but you can easily adjust to taste.  To ensure the clips don't have any support/bridging artifacts, please print upright with supports as shown.