SHODAN - System Shock

After searching for a model like this, I wasn't satisfied with what was out there. To create this, I used an image from the game, adjusted color to black and white, and then used an AI tool to generate this STL from the photo and then did a little post processing it on it. I have uploaded the original photo scale (200x217) and a cut version that is square (200x200).

I made this to go on the front of the MASS NAS I am working on printing (link below). I plan on putting green lighting on the inside of the NAS to make this light up. I would upload the modified STL I did of the MASS NAS front piece but I have the premium version of the case (paid for) so I don't think that is allowed… apologies. 

I used clear PETG and black PETG for this print. For my print in the picture, I adjusted the height of the model in the slicer to 1mm. At 0.6mm I added a change color. In the original (3mm height), the background is 1mm thick (33%) but I when I was messing around with the settings in the slicer, 0.6mm color change at 1mm height looked good to me. My print in the photo is ironed on the top. I would also recommend adding a z-hop potentially. You can see in my photo that the nozzle created a diagonal line across the top in several places which I don't think looks terrible but I might end up reprinting it.

Enjoy :)

Print Settings: 

• 0.4mm nozzle
• 0.1mm height
• 100% infill, Rectilinear
• No supports
• Ironing (All top surfaces)
• PETG (250C/85C)
• First Layer Height: .2mm
• Ender 3 S1 Pro
• Ironing Enabled

MASS NAS: https://www.printables.com/model/590711-nas-itx-pc-case-with-stackable-expansions-modcase