BTECH UV Pro Yaesu Clip Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter that screws onto the BTech UV Pro that allows you to put on the Yaesu button style clip
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is an adapter that allows the use of a Yaesu Clip-14 button style clip. I have these clips on all my stuff so makes it really easy to just clip the radio on and go. No additional hardware required. This screws on with the factory BTech UV Pro clip screws, and the screw that comes with the Yaesu clip.
Printed in ASA so the sun doesn't make it soft/melt, 95% infill, printed in orientation of .stl
I used Initial Layer Height of 0.1mm and Layer Height settings of 0.1mm in BambuStudio
Link to clip: https://www.hamradio.com/detail.cfm?pid=H0-006807&srsltid=AfmBOoosUv_4LmpTGO-Yy3bbXB-Adm4vEb8R-KZny4So1gPm37cucvAI