1 / 2
Lack drawer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
I know there are plenty of other designs, but I wanted to try and create my own. I wanted something for under the table where I could throw filament scrap away. I printed on the Flashforge Adventurer 5m on the stock settings with Overture PLA. Supports are needed.
I also added magnet holes, two sets on the rail and one set on the drawer. The magnets I used were 8x2mm from amazon.
Screws holes based on M4 size.