Fujitsu-Siemens LIFEBOOK E-6595 Battery Dummy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I'll sometimes use this Laptop for retro Things, but I don't need a new Battery. The old one, has to be disposed as it…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I'll sometimes use this Laptop for retro Things, but I don't need a new Battery. The old one, has to be disposed as it was dead and broken Batteries are always a risk. To Close up the hole I Designed a dummy to fill it up.I used the original clip to lock the battery in place.
If you print the dummy hollow, you can also fill it up with and Material, that can get hard to add as counterweight. The dummy is way lighter than the Original Battery. I attached the FreeCAD and a STEP-File, for anyone who need to edit it.
This is a tight fit with small tolerances, so it depends on the Printer calibration how good the Model is printed. If you print it in vase mode and cut away the inner parts of the Battery PCB from the Laptop side, you can test-fit it and saving Filament. I recommend doing a test-fit, before printing it with infill. Happy Printing!
Print Settings
Printer Brand: Creality
Printer: Ender 3 Pro
Rafts: No
Supports: Yes
Resolution: 0.2
Infill: 20
Notes:
I printed it with supports for a better fitting. It may work without anyway. Printing upside down is recommended.
Category: Other