1 / 4
Holder for metric T-handle hex wrench set 2.0 - 12mm — image 1
1 / 4

Holder for metric T-handle hex wrench set 2.0 - 12mm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Holder for metric T-handle hex wrench / allen key sets ranging from 2.0 to 12 mm

Rating
0 / 5
Likes
18
Downloads
153
Makes
1
Views
1,179
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

Holder for metric T-handle hex wrench / allen key sets. There is no real standard for the sizes included in a set; this holder takes the following sizes:

  • 2.0
  • 2.5
  • 3.0
  • 4.0
  • 5.0
  • 5.5
  • 6.0
  • 8.0
  • 10.0
  • 12.0

The handle thickness allowance in this design was derived from a couple of sets that I own.

This design supports both magnetic hold-down as well as legs for use on non-ferrous surfaces. The legs snap into the magnet holes so if you want to switch from magnetic to legs, you need to remove the magnets. If you want to mount it on a wall, you'll need to drill some holes to screw the legs into the holder base, and to attach the legs to the wall. 3M Command strips might be strong enough to attach the legs to a vertical surface.

The magnets and plastic self-tapping screws are from McMaster:

Magnet - https://www.mcmaster.com/5862K14/

Screws - https://www.mcmaster.com/95893A218/

I'd like to acknowledge the other people who have published T-handle hex key racks. This is a ground-up design and not a remix of any one specific predecessor, but it owes various features to several of them.

The OnShape CAD file is here: https://cad.onshape.com/documents/b434470859c4ea422aad23df/w/74dac20e70437686e7cfdaa7/e/4ba54f470610b81990116710

This part is rather long; it will fit diagonally on a Prusa MK3S but possibly not on smaller print beds. I printed mine at 100% infill to put more weight into it so it will stand up better with short legs.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

No

Resolution:

.20

Infill: 

100%

Filament: Overture PETG

Tags