1 / 1
Garden Chair Seperator / Stacking protector
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for garden chair seperators / support for stackable chairs
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 28
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Since all the dividers on my garden chairs were broken, it was no longer possible to stack the chairs properly causing them to rub on each other. This caused the powder coating to peel off.
However this part has a slightly larger opening as the original.
My print settings:
Material: PETG, PLA is not recommended.
Layer: 0,20mm
Infill: 15%
Perimeter: 4 (would be the most stable option, less would work maybe)
The profiles on my chairs are 40.5x12.5mm
If you found this useful please leave a make and/or a like or support me on Ko-Fi -T hank You!