Nerf Mega Bigshock Rear load Inline Mag Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My remix of https://www.thingiverse.com/thing:4713483. Hardware you will need. Listing McMaster-Carr parts #s will…
- Rating
- 5 / 5
- Likes
- 74
- Downloads
- 211
- Makes
- 2
- Views
- 2,397
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My remix of https://www.thingiverse.com/thing:4713483.
Hardware you will need. Listing McMaster-Carr parts #s
will need one of these for the breech -
Oil-Resistant Buna-N O-Ring
1/16 Fractional Width, Dash Number 012
9452K21
and 6 of these but I'm sure there's a ton of other screws that will work -
Steel Phillips Flat Head Screw
82 Degree Countersink Angle, 4-40 Thread Size, 3/8" Long
90273A108
And finally, you will need a length of 17/32" brass barrel. to stick in Mega_Inline_Brass_4rd.stl. The brass should seat 1cm in the part and glue if needed.
I used 2.5" of brass but haven't tested what is most efficient. Getting 75 - 100 fps.
Build includes this Picatinny hand stop: https://www.thingiverse.com/thing:4154584
Grip cover -https://www.thingiverse.com/thing:4322754
and a couple of remixes https://www.thingiverse.com/thing:4790443 https://www.thingiverse.com/thing:4790442
Print Settings
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: PolyMaker PLA
Category: Other