1 / 3
Chain waxing joiner
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
simple joiner to help with Waxing bike chains
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 23
- Makes
- 2
- Views
- 294
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple joiner similar to Silka solution to hold bike chains while waxing in the hotpot
Cord is fishing trace line around 1.5mm dia with the end folded and crimped with the ferrel.
printed at 0.2mm in petg no supports did run outer brim but my build plate is a bit worn out :-( , threads are M10, 1 slight drop of oil and the threads work perfect. if you have a set of taps and dies you can run them over them to finish off