Baby Dragon and Micro Mist Maker
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.31 – €2.82 net (excluding VAT)
For file: Lid_0.4n_0.2mm_PLA_MK4S_2h8m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.57 excluding VAT (range midpoint).
- Weight reported by the author
- 41 g
- Print time reported by the author
- 2.14 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A small Mist Maker or humidifier. Only 50 X 50 X 50 mm. Plus a funny baby dragon to put it in.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 18
- Makes
- 0
- Views
- 230
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Micro Mist Maker
Here is your revised, smaller and more engaging version, focused on integrating the mist machine into an existing 3D model:
This is a redesigned and more compact version of my Mini Mist Machine, designed to be easily integrated into other 3D models.
To make integration simple, I’ve included a special “cut-out” model that you can subtract from your own design to create the internal cavity for this mist maker.
🔧 Design integration details and reference model:
See the instructions on how to integrate the mist maker in a design in my previous mist maker, the Fuming Dragon Head, here:
https://www.printables.com/model/1389022-fuming-dragon-head
💨 Required components for the Micro Mist Maker:
– Small ultrasonic humidifier: Amazon Link
– Compact fan (optional): Amazon Link
The fan helps push the mist outward but can be skipped in simpler setups.
🛠 Assembly tips:
– Trim the provided paper wick so it reaches the bottom of the housing.
– Do not overfill! Too much water can flood the electronics.
– A USB power bank works well for powering the unit.
– The fan wires can be soldered directly onto the humidifier’s circuit board—two holes are provided. Be careful with polarity.
– To bypass the switch, solder a small wire bridge across the provided pads. The unit will then start automatically when powered.
Bonus
I added the model of a KI-generated Baby Dragon that you can print immediately.
🖨 Printing:
Straightforward to print and assemble. Use the cut-out model to design around it.
I advise to use Organic supports from the build plate and lightning infill for the dragon.
📸 If you print it, share your photos!
❤️ If you like the model, give it some hearts.
❓ Have questions? Just ask!
The Baby Dragon has been generated by ChatGPT and Rodin