1 / 1
Spudger Tool, no peg with curves
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Removes the peg and adds 5mm and 10mm curves to nerdyviews' Transformers figurine spudger.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
If the figurine is tight (3D printed/snap fit/etc.), I recommend removing the thin layers on the flat sides so they don't break off inside the body. I printed with the gyroid sparse infill pattern to balance strength on all axes.