Move Shoot Move Polar Scope Arca Swiss mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Move Shoot Move Polar Scope Arca Swiss mount for calibration
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Move Shoot Move Polar Scope Arca Swiss mount, which can be used to align your scope.
I bought the Move Shoot Move Nomad with the polar alignment scope and while searching for information on how to use this equipment I found a video on YouTube about aligning the polar scope. The video shows how to do it in the mount that comes with the Nomad, but mine wiggled a little bit in the original mount, so I made this 3D model and depending on the accuracy of your printer you can print one with more or less free play to get the tightest fit.
The process is simple, insert the polar scope in the 3D print and mount it on an Arca Swiss compatible tripod. Then aim at something, rotate the scope and adjust the three 1.5mm allen wrench screws until the crosshair remains centered on the mark during the rotation process.