1 / 2
Leaf blower Gas Cap Big M M260B
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Old 2-stroke leaf blower gas cap, printed in PETG
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 30
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Gas cap broke so I made a new one, its designed to be as close to the original as possible and uses the same gasket. I was worried that the Elegoo PETG PRO (Burgundy red translucent) wouldn't hold up against 2-stroke mixed gas but its been a month now and it seems to be just fine so I'm uploading it.
Its for a very uncommon and old leaf blower but maybe it can replace other broken gas caps. The outer diameter of male end (gas reservoir) is 34mm, the depth of the thread is 2mm and the pitch is 5mm. If yours matches this description then it may fit yours too!