Pumpkin keychain
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial
Cute keychain looking like a realistic pumpkin. Easy print and assembly. No supports are required.
Print the pumpkin itself in an orange color. Print the stem in a green color.
Enjoy printing this object.
Print Settings
Printer Brand:
Flsun
Printer:
Flsun V400
Rafts:
No
Supports:
No
Resolution:
0.2 mm layer height
Infill:
10 %
Printed parts and a thread
Assembly part 1
After printing you should have the two halves of the pumpkin and the stem. A thread is required.
Assembly part 2
Fiddle the thread through the hole as shown on the picture. It should form a loop.
Assembly part 3
Add a knot and cut the excess thread. Make sure you are happy with the size of the loop.
Assembly part 4
Add glue to the knot to prevent it from opening once trapped inside the pumpkin. Add glue to the lower part of the stem and the contact surface of the two halves. Put everything together. Wait till the glue is dry.
Category: Keychains