1 / 5
Honda Odyssey 2025 Integrated Magsafe Charger Pad — image 1
1 / 5

Honda Odyssey 2025 Integrated Magsafe Charger Pad

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A drop-in replacement for the anemic Honda Odyssey 2025 wireless charger pad (part #8A370-THR-A020-M1)

Rating
0 / 5
Likes
5
Downloads
19
Makes
0
Views
309
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

This model is a drop-in replacement for the Honda Odyssey 2025 (and possibly other Honda models) charger pad.  I found the stock pad to be useless; it didn't charge my phone but did an amazing job of keeping it warm!  The charger unit is Honda part #8A370-THR-A020-M1 and was released in 2023.  It appears to also be used in the Civic and Accord so this model may also work in other Honda cars.

This model uses the stock wireless charger frame and replaces the insert with a magsafe compatible enclosure. You should be able to use any MagSafe charger puck but I recommend the JSAUX magpucks which come in matching black. Power is provided by the center console USB outlet so the cable remains hidden providing a built-in seamless install.

I printed this in PETG face up on the build plate with supports.  Took about 3hrs on my CoreONE.  This will generate infill support material on the flange wings and the center of the unit.  Remove this before mounting.

Installation is simple:

  1. grab the edge of the charger enclosure from the storage bin side and gently lift – there are four anchor points which should release without too much force.

  2. trace the power cable and push in the release tab to remove the whole unit from the power lead

  3. unscrew the four anchor screws and remove the existing wireless charger

  4. on the 3d printed enclosure, carefully guide the magsafe cable into the cable hole and gently pull on the cable while pressing in the magsafe disk into the hole.  It works best to try and angle the cableside of the magsafe disk in first and then pressing down on the opposite end

  5. mount the new charger insert in the housing (reversing step [3])

  6. plug the USBC cable into the existing outlet below the charger mount

  7. gently push the whole unit back into place – the extra magsafe cable should safely tuck under the device

Here's the TinkerCAD Link to the source model if you want to make changes.

Cheers,
Nigel.

Tags