Stationery holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.24 – €2.74 net (excluding VAT)
For file: Pencil holder.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.49 excluding VAT (range midpoint).
- Weight reported by the author
- 31 g
- Print time reported by the author
- 2.5 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Stationery holder, it should be able to fit most pencils and pens along with rubber and paperclips for desk organisation
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
I printed it with white Soleyin PLA and designed it to be able to hold its contents without falling over.
the print shown was made with a 0.4mm nozzle at 220 degrees nozzle temperature, 120mm/s speed and 60 degrees bed temperature with 40% infill.
I'd recommend going with a lower layer height if you want a finer finish.
printer took just under 2 hours to print at current settings, but slicer estimated 2 ½ hours. Final print shown weighs 31g.
hopefully its useful to someone.
If you do use it, thank you.