1 / 3
Intermediate piece for securing a cover cap of a shower hose connection
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The cover cap of the shower hose connection was loose, so I created this intermediate piece to securely fasten the cover
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The part is printed using flexible filament. To ensure easy assembly and disassembly, I chose ColorFabb Varioshore and adjusted the settings for the lowest possible shore hardness.
Settings:
| Parameter | Value |
|---|---|
| Extrusion Multiplier | 0.65 |
| Material Density | 1.22 g/cm³ |
| Idle Temperature | 70 °C |
| Nozzle Temperature | First Layer: 250 °C |
| Other Layers: 250 °C | |
| Bed Temperature | First Layer: 80 °C |
| Other Layers: 80 °C |
Print instruction:
- printer: 2 head or AMS required
- material: flexible filament
- supports: required - PETG
- layer height: 0,2mm or 0,3mm
- nozzle diameter: 0,4mm or 0,6mm
- brim: not required
- enclosure: not required