Xtool F1 HEPA Unit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple solution to keep harmful micro particles out of the air and to collect soot
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
HEPA AIR UNIT - for XTOOL F1
This is a simple design to keep some HEPA air filters on the exhaust of the F1 while its running.
This is a solution I came up with because the F1 sits in between two of my 3d printers, and I didn't want to have to run a house around to an air unit, not to mention pay for an air unit. I included a shroud portion that can fit a 120x25mm 12v or 24v fan for some extra suck. I also included a house adapter piece.
If you plan to print this design, you will need
2 - 80x40x15mm HEPA Filters
(depending on which design you go with)
with fan shroud - 16 - 8x2mm magnets
without fan shroud - 8 - 8x2mm magnets
AMAZON LINKS
Magnets -
https://www.amazon.com/dp/B0DD78JPBB?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1
HEPA Filters -
https://www.amazon.com/dp/B0782T7L6P?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1