1 / 2
Ying Yang Matching Pendants
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two matching Ying and Yang pendants for necklaces
- Rating
- 0 / 5
- Likes
- 107
- Downloads
- 231
- Makes
- 0
- Views
- 855
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial
Dimensions
- Overall: 20.658 x 29.526 x 5.088 mm
- Hole Radius: 1.00 mm
Assembly
- Print 1x Font, 1x Back, and 1x Connector
- The three pices can be sandwiched and glued together using epoxy or CA glue (Don't use too much or it might spill out of the seams).
Print Settings
- Orientation: Flat side down
- Material: PLA, PETG, ABS, etc.
- Layer Height: 0.16mm or 0.2mm
- Infill: >20% - Any Pattern
- Supports: On for Front and Back Pieces
- Support Z Interface Distance: ≤ 0.1mm. If higher there will be a gap in the seam after assembly.
Customization
- Includes a .f3d file to adjust the dimensions if needed.