1 / 3
The Punisher extruder wheel Bambu A1
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I added The Punisher logo onto the extruder wheel to keep the flow going from the cover
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Public Domain
- Textured PEI plate
- 0.4 mm nozzle
- 0.12 mm High Quality
- Outer wall line width 0.2 mm
- Inner wall line width 0.2 mm
- Top surface line width 0.2 mm
- Arachne wall generator
- Outer wall speed 60 mm/s
- Top surface speed 60 mm/s
- Inner wall speed 150 mm/s
- Gyroid sparse infill at 15%
- I enabled supports but you may not need to
- If no AMS you could stop the print after layer 39 and switch to another color at layer 40