Lock Cylinder Holders
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.51 – €0.62 net (excluding VAT)
For file: KiKHolder_0.3mm_PLA_MK3S_34m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.57 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 34.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Holders for positioning KiK (Key-in-Knob) lock cylinders and Corbin Russwin Interchangeable Core locks in a small vise.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 96
- Makes
- 0
- Views
- 744
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Key-in-Knob and Interchangeable Core locks can be difficult to hold and position for locksport picking due to their shape. Even small vises, such as a Pana-Vise tend to bind them up, making them impossible to pick. These prints are holders/adapters that grab onto the locks and present a simple rectangular shape that is easy to mount in a vise.
The KiK holder was designed using measurements taken from a Schlage cylinder but I'd imagine it will work for just about any KiK lock. The IC holder is specific to the Corbin Russwin CR80 family of interchangeable core locks.
I printed these in a generic PLA at 0.3mm layer height with great results. The only settings I changed was to bump the number of vertical shell walls up to four.