Mazda MX5 NA/NB floor mat bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a bracket that keeps is place the OEM driver's side floor mat.
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 97
- Makes
- 1
- Views
- 471
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
This is a bracket that keeps is place the OEM driver's side floor mat. Sometimes it gets lost but now you can print one easily for yourself in about 1h15min with 10grams of material.
It has a hinge inside that permits to rotate the little blocker on top, just like the OEM thing, but you still need an ordinary clip to fix it to the ground, in the hole under the seat.
I think PLA will do the trick here but you are free to experiment with other materials.
The part should be printed vertically, (like shown in the image) on it's long side, to minimise the use of the supports. I strongly recommend using brim of 5-7mm to keep it in place.
Upload of Model by Poz89 on Thingiverse, sharing here as well as it's a useful part.