RESTORE YOUR CLASSIC: VFR750F RC36 (GEN 2) SEAT COWL
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
VFR 750F RC36 gen.2 Seat Cowl
- Rating
- 0 / 5
- Likes
- 1
- Makes
- 0
- Views
- 193
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Standard Digital File License
This is a high-fidelity, dimensionally accurate 3D model of the OEM seat cowl for the Honda VFR750F RC36 gen2 motorcycle.
This project addresses the common issue of sourcing undamaged original plastic components for classic motorcycle restorations. The model was created from a high-resolution 3D scan of an original factory part, ensuring an exact replication of its form and fitment. It serves as the ultimate solution for replacing a cracked or lost cowl, or for converting the bike to a solo-seat configuration.
Key Design Features:
OEM Geometric Accuracy: Derived from a 3D scan, the model preserves all original contours and surfaces for a factory-correct appearance.
Optimized Rear Mounting Points: The rear mounting points have been refined in the digital model to provide a more secure and precise fit compared to the often-worn originals.
User-Drilled Front Mounts: The front mounting points are provided as solid bosses. This allows the end-user to drill the holes to perfectly match their specific bike's subframe, compensating for minor manufacturing tolerances and ensuring a rattle-free installation.
Validated & Print-Ready: The model has been checked for errors and is supplied as a manifold (watertight) STL, ready for slicing.
Print Settings
For a durable, road-ready component, it is critical to use appropriate materials and settings.
Recommended Material: PETG or ABS. These engineering-grade filaments offer the required strength, temperature resistance, and durability for automotive applications. PLA is not recommended for this part.
Print Orientation: Orient the cowl on the print bed with its largest, flattest surface down for maximum stability.
Supports: Supports are recommended, particularly for the overhanging sections of the mounting bosses on the underside of the cowl.
Layer Height: 0.15mm to 0.2mm for a good balance of strength and surface quality.
Infill: A minimum of 25-40% infill with a strong pattern (e.g., Gyroid or Cubic) is recommended to ensure rigidity.
Post-Processing
Achieving a professional, paint-ready finish requires a systematic approach to post-processing.
Surface Sanding: Begin by sanding the part to eliminate all layer lines. Start with a medium-grit sandpaper (e.g., 120-220 grit) and progressively move to a finer grit (e.g., 400+ grit) to achieve a perfectly smooth surface.
Filling (Optional): For a show-quality finish, apply a thin coat of automotive spot putty or body filler to address any minor imperfections. Sand smooth after it has cured.
Priming: Apply a high-adhesion plastic primer. This is a crucial step to ensure proper paint bonding and long-term durability of the finish.
Final Painting: Once the primer is fully cured, apply your chosen automotive paint to perfectly match your VFR's color code or to create a custom look. A final clear coat is recommended for UV protection and gloss.