1 / 2
Arduino UNO R4 Wifi Slimline Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This case has been designed for the Arduino UNO R4 Wifi board. (or the non Wifi Version)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 58
- Makes
- 0
- Views
- 240
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Arduino UNO R4 Wifi Slimline Case
This case has been designed for the Arduino UNO R4 Wifi board.
(or the non Wifi Version)
The cover clips into place without the need for screws
The board is fixed to the base with 4x M3x4 screws.
Printed on 0.2mm PLA, no need for supports.
4x silicone self adhesive feet hold it firm on the workbench.
I've included a Step file as well as the stl as this will make it easier to make any adaptions you may need.
Hope this helps someone.