Beyond Vented Gasket Template
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For use in making a custom face gasket.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 30
- Makes
- 0
- Views
- 338
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Bigscreen Beyond 2 with eyetracking is a bit warm on the face. This allows for airflow while still blocking light from entering. This is only the template stamp, you'll have to supply your own face scan or, at the very least, estimate the curve of your face. Then combine with that with this template to get a vented bespoke face gasket.
This template is made from the Cushion Support Assembly model from Bigscreen projected onto a sketch and extruded back so it should exactly match the holes for eye modules and USB ports. The eye holes are a bit wider than the default cushion which is helpful for me.
The magnet pegs are made 1mm short to fit 5mm by 1mm magnets.
My printer can do 55 degree overhangs (or so I thought), so all the vent zig-zags are 54 degrees from vertical, copied and pasted over and over, and then cut into the template. Each zig-zag is positioned in such a way that light needs to bounce at least twice to get in.