Darth Vader Inspirational Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Do your part to make the world a better place
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 30
- Makes
- 0
- Views
- 242
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Note: Pretty much any black should work for the first layer (in the sample picture I used Esun PLA+ black rather than charcoal black)
Project: darf.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Overture Gray Blue Transmission Distance: 3.5
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Esun Bone White Transmission Distance: 6
PLA+ Sunlu White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #9 (0.8mm) swap to Gray Blue
At layer #11 (0.96mm) swap to Grey
At layer #12 (1.04mm) swap to Bone White
At layer #17 (1.44mm) swap to White for the rest.